Connects to a USB Host as a Class Compliant USB MIDI Device via USB Header on the rear of the module.
1U/3U 2HP USB Extender available to bring the rear USB port to the front panel of your modular. Handy but not required, available at intellijel.com/shop/eurorack/usb-extender.
Configurable MIDI Clock/Transport Send and Receive.
MIDI NoteOn/Off messages from Tracks 1+2.
Three config options for assigning Slide to CC supports a wide variety of synth configurations.
Assignable MIDI CC number from each Track’s CV lane.
Assignable MIDI Channel and CC number from each of the Mod Lanes.
Velocity Support and Modulation via Aux/Mod/Ctrl/Track CV. Configured in the Track Menu.
Setup MIDI Channel and CC for Mod Lanes and CV in the Track and Mod Menus.
SysEx backup and restore of Presets, the current State and Global Settings.
New Randomizer for Track and Stage parameters — When ALT is active the 3 AUX buttons will perform the following functions:
ALT + AUX X: Randomize current screen parameters.
ALT + AUX Y: Morph Current Screen Parameters.
ALT + AUX Z: Undo Random/Morph Current Screen Parameters.
New Gx Expander Modes!
Transport renamed to Transport A
Transport B — Odd/Even Mix
Run
Reset
/1
/3
/4
/5
/8
/16
Transport C — Div/Mult Mix (Thanks Pow Pow!)
Run
Reset
x4
x2
x1
/2
/4
/8
Probability Clock (Thanks again Pow Pow!)
x1 (100% Prob)
x1 (75% Prob)
x1 (50% Prob)
x1 (25% Prob)
/2 (100% Prob)
/2 (75% Prob)
/2 (50% Prob)
/2 (25% Prob)
Gx Transport A/B/C Options now use the global reset flag instead of First Pulse from the selected Track.
Added “Velocity” to Output A/B options for use in modular context.
Added “Reset” (Global) to Output A/B options.
“Clock Mode:” has been updated to “Clk/Rset Out:” - Same options (Always|Running), but encompasses the global Reset outputs on Gx/A/B as well.
Show most recently loaded Preset Chain with flashing LED.
Added “Screen Level” adjustment to the UI Setup menu.
Added “Update Firmware…” to Setup menu. This will enter the bootloader.
I got hit by this very specific bug on the stream, so frustrating and so specific! Before I cover slide, you’ll hear my confusion as to why Track 2 is running so slowly. This would not be noticeable in almost any other scenario!
Well, here’s a fix.
1.4.1 (2021-02-11)
Fixed very specific bug; undoing a randomized track clock division change while stopped.
Good job I never bought a CV to MIDI Module.
This update makes that idea completely redundant now.
Does the randomiser function work on notes and gates within a scale across a whole pattern?
or just on alt functions?
in the video you demo randomising the mod cv but not notes / gates
FANTASTIC.
I’m not home at the moment, hence the questions. But it will be the first thing I do when I return.
I’ve already ordered an extra long 10ft usb cable to reach from Metropolix to my Mac in anticipation.
I’ve updated to 1.4.1 but i can’t seem to use the midi functionality? It is connected in the same way as when i did the firmware update, but i get a code 43 unknown usb device (device descriptor request failed) in device manager (Win10).
So, nevermind all working now. I restarted the computer and had to physically unplug the cable from the back of the module (was connecting the lead out the case before) I think this loaded the driver, since all is working now. And it works by plugging the lead, so no nead to go to the back every time.
This is so awesome! i was planning to buy a cv to midi module just because i wanted to be able to use the metropolix in the daw. And i can use rock-steady tight cv clocking while having all this hands-on sequencing and modulation power in the DAW.
I see you’ve added a probability feature to the gate expander. Great idea, i was planning to pair mine up with a mutable Branches for this purpose. Now i just need a logic module to get the dropped gates from the probability outs, and then i can do a call-and-response between two voices and one of Metropolix’s channels.