1.36 is now the official release and is downloadable for both Mac and Windows on https://intellijel.com/firmware-updates
So far it’s working like a dream! Thanks a lot!
Glad to hear!
Could you also upload the hex-file for 1.36 please?
Hi Intellijel team,
The 1.36 link is down with an 404 message.
Just get the official firmware updater, we cleaned up the betas downloads
Here’s the hex files:
Thanks, running 1.36 on the metropolis now
Hi, I just updated fto 1.36 but I canot get the ratcheting to work? I couldnt see any other reports of this so I assume its somethign I’m doing. I tried copying the 1.30 video : holding a stage button and turning the encoder but it just adjusts whatever value the encoder ws arasdy on. I dont see the screen in the demo video? Please help?
edit : its working now. I dont know why but lets agree user error.
tka for a crackin’ update
it only works when you exit all other menus, so you should push exit before trying to use racheting settings I think…
I’ve noticed something rather odd with the reset behavior of the Metropolis in 1.36.
Whenever I give the Metropolis a gate signal into the reset with RST_F, it triggers the gate. I have an Atlantis hooked up to the Metropolis and even when the sequencer isn’t running, and I send a gate signal into the reset input, the Atlantis sounds.
This also results in double triggered notes when playing a sequence and sending gate reset signals.
Does it make a difference whether it’s with Internal or External Clock?
Just leaving a Metropolis functionality suggestion here for any potential firmware updates in 2019/beyond:
Using the encoder to set slider/note value along with prev/next buttons.
For example: Hit “next” button, dial in the note on the encoder, push encoder to “set” and repeat as needed. Could also use similar encoder functionality along with the sliders. Touch which slider you want to change and this allows you to dial it the note value via encoder turning. Push encoder to set.
Metropolis is by far my favorite sequencer of all time though sometimes I find myself wanting to use the encoder to enter note values.
Food for thought!
Keep up the great work!
This is with external clock, since I’m clocking and reseting from an external source. Do you want me to try sending a reset while on internal clock?
I forgot to mention that the Metropolis resets correctly, but also triggers a gate.
By the way, I didn’t get a notification of your reply. That’s why I’m replying 5 days later.
I purchased a Metropolis back in November 2016 and it still has the same firmware as it was delivered which is 1.14
I appreciate that there are a lot of enhancements with the latest firmware but I am struggling with a method of actually applying it to my unit.
According to the old manual I can either use an updater app along with the Intellijel USB ISP dongle or I can purchased a new firmware chip.
I am struggling to find either to be honest.
Could anyone please advise on what my options are?
You should be able to do the firmware update with any Arduino programmer. The Nano is very similar to our USB ISP so I have been recommending it as an alternative and I know some of our customers have successfully used it to update their Metropolis.
You can find it here: https://store.arduino.cc/usa/arduino-nano
If anyone does NOT want to deal with the firmware update -
I have the USB ISP module now and I flash your Metropolis for FREE, as a service to all you awesome people.
I am a software engineer and well-versed in Eurorack, flashing devices, etc. I am using the official USB-ISP device.
- You cover $15 postage (plus postage to send the module)
- If your module gets bricked (remote but always real possibility), I am not liable or responsible for the module.
I am in Bay Area, CA. PM me if you are interested.
You can always contact support and send it in for updating, You would only pay shipping one way. It may be delayed if coming from outside of Canada during the COVID-19 pandemic.