SIAP, but I’d like a simple hi quality mic pre in 1U.
My second request I know has been mentioned but, one more vote for a simple VCA.
2 Likes
You got your wish 
Ah ok I follow now, a 1U only kit.
So super easy to make for so many people though, I know Danjel has mentioned that this is the type of thing he would expect people to run with DIY.
But yes, a kit would be great eventually. I’m sure it’s always a matter of priorities first.
I made my own rack ears for the 4U case really easy. It’s only slightly more involved to do 1U out of readily available angle aluminum.
I would really like to see a bi directional midi module that can be a usb host. i know the umidi is a great module but i would love something that can use the full potential of the midi ins and outs of my fancy intellijel case. and it would be killer if it could bi directionally talk to my OP1.
1 Like
It would be nice to have an 8HP Headphone Out that’s normalled to the outputs of the Audio IO, or a 32HP Audio IO with Headphones out. That way you could fit MIDI IO, Noise Tools, Quadratt, Audio IO and Headphones in a 104 1u row.
4 Likes
…or normalled to the Mix Up.
3 Likes
1u Plog! 
3 Likes
Yes 1u Plog would be great
1 Like
I agree with splitting the Audio I/O into separate Ins and Outs modules. I never use the Ins, and could definitely use the HP for something else.
1 Like
If we’re talking about the Audio IO I would love to have Audio IO with headphone INSTEAD of Input. Esp now that we have the Pedals module, I’m not sure if Audio input is as valuable anymore
2 Likes
It occurred to me that a Footswitch 1U might be useful. It could just have a 1/4" input for a standard midi footswitch/sustain pedal and an 1/8" gate output.
2 Likes
Could follow the Monome Walk and have a momentary gate and a toggled gate
1 Like
Any update on what’s being worked on in the 1U 8HP format?
Speaking of Pedal I/O and less need for audio input, would it be possible to wire the 16hp Pedal I/O module to the audio in jacks on the back of the case (one channel for send and the other for return), rather than requiring the additional 8hp Pedal Jacks module? Not only would I like to save the space, I would prefer to have the jacks on the back of the case. I know this would require some soldering with the case’s current wiring, but maybe in the future make those jacks more multipurpose, depending on which modules you connect to them.
We got your back, this is already an option: https://intellijel.com/product/pedal-i-o-7u-case-adapter/
1 Like
Sweet! Although this looks close, but not quite exactly what I need. This repurposes both the input and output jacks, right? I still want to use the audio outs as is. I just want to use 1 audio in as a pedal send and the other audio in as a pedal return. Would this work for that?
You’re right, (I’ll get @ScottMFR to make up a better drawing for the site He told me to RTFM, and it’s covered there) but here’s a quick photo. You can hook up 2 pedal I/O modules to the 4 jacks on the 7U Case, and each one takes over a L or R pair of jacks.
In the pic, Yellow is OUT from the synth and Orange is back in.
If you get creative, you could modify an 8pin ribbon cable, to just take over the inputs. I’ll put the suggestion forward for an alternate adaptor, but it’s pretty niche.
1 Like
Does that mean that the only way to get the Pedal I/O to work in stereo is to use two?
Yeah, the Pedal I/O is single channel.
For Sereo, you could use the Audio I/O 1U in a similar way but if you wanted a Wet/Dry mix, you’d have to mult out your dry signal and mix the 4 channels again with something like a Quad VCA or a Mixup.