My primary request is that it should be possible to fully open the VCA with a 5V signal, and provide an attenuator to tame/limit hot control signals. This would allow more control sources to affect the entire range of the VCA.
Quite a few of the basic VCAs on the market require 10V to fully open, so if one is using e.g. a Doepfer type EG (0-8V) then it’s not possible to fully open the VCA unless some amplification is used to boost the EG output, which frankly is a bit naff.
One more vote for no knobs! And stereo for sure. A few of those would save a lot of rack space.
I’m sure it’s impossible, but if you all did a LPG/VCA, I’d be so happy.
Switch for LPG/VCA, CV in, IN, OUT, and LEVEL knob…or no knob but input is unity with nothing plugged into the input.
The Stereo VCA with shared controls would be fantastic.
I’m pretty sure an Intellijel LPG would break the internet.
A simple dual vca kinda design gives some good opportunity for using logic to give different uses. I like the crossfader idea a lot, a simple crossfader is an easy way to get musical expression in a very small space. I would definitely get that
Also a fan of how the vcas are implemented in IFM Denum/Dunst. Two vcas and the difference between the modulation voltage on each channel decides which output and how much gain per output.
My vote would be for a dual VCA with individual attenuation, simple IN/OUT/CV IN
Nice and compact. The normalizations and LEDs are a nice touch. Is that 10hp?
Looks great! do you think it might be possible to chain a couple of these together so that the ins/cv and outs continue to be normalled?
Very nice! I am going to grab a couple of them.
nice looking glad to see some smaller 1u modules happening, seems to be more configurable and fun each one thats released. this one seems like a must have for every case at least 1
Great! I’ve left a space for this one.
If you plug inputs into A and B, but only plug into output VCA B, does VCA B contain the sum/mix of both, or do VCA A and VCA B stay separate?
Any rough idea how soon is “soon”? I’m about to pull the trigger on a 2hp VCA but would rather wait for this if it’s only a month or so, now that I have some 1u space freed up by replacing my Audio I/O with a Stereo Line Out.
It is in production and should be less than 4 weeks. A lot rides on Metalphoto delivering panels on time though…
That little arrow pointing from Out A to Out B is your answer.
A is normalled to B.
Demo video!
Whats the voltage range, is it 5v for unity gain?
Any idea when uk/EU dealers will have them?
Excellent Video as per usual!!!
