Height of 2x 7U Performance Cases with Joiners?

Hello, all!

I’m curious if someone could tell me the height of a pair of 7U Performance cases with the joiners.

And while we’re here, how about the depth, too, from the bottom front touching the table to the top of the back?

I’m just trying to figure out how it would sit in my setup.



Seconded. Also really interested in these measurements as am on the verge of picking up a second 7U case to attach to my first.

Measured on my setup - 18" deep from the front edge of the bottom case to the tip of the joiner’s foot, 19" from the top corner of the upper case to the table.


We have this information on our FAQ page here: https://intellijel.zendesk.com/hc/en-us/articles/360036981634-What-are-the-dimensions-of-two-joined-cases-

I’ll copy/paste the entry below.

Bottom footprint (Front edge to rear foot of joiner) = 45cm (17 3/4")

Height of back corner of top case = 45cm (17 3/4")

The rear foot of the joiner is the farthest point of the two case assembly. The top case does not overhang the foot.

1 Like