#355

So on some digging, I see that there are several things good already happening that I didn’t know about!

The soon-to-be-released and already-documented Audio Jacks Rev2 really helps out, especially in conjunction with Mixups, and I see that there are separate stereo ins/outs modules planned as well. So that pretty much addresses any form of audio I/O or pedal I/O most people would need in the 1U format, and makes things super flexible. I’m eagerly anticipating this.

1 Like
#356

Proud owner of two 104 performance cases, having some 1U space to cover…
From my perspective utility modules are paradise in 1U as hyper practical & efficient.
Logically speaking (hehe), logic / switch modules would be killer and add intellijence (HAHA!!).
Jokes aside, it would make soo much sense and I would be one of the first ones buying and enjoying.

Guys @ Intellijel…pleeease.

2 Likes
#357

Would love a 1u compressor module. Single knob style with Wet/Dry for parallel compression. Would be amazing for end of chain before going to the line out 1u.

#358

With the release of the Palette cases 1U space is at even more of a premium. There are two modules in particular that I would love to see trimmed down versions of:

  1. A simple clock alternative to Noise Tools. Steppy 1U and Noise Tools is a popular combo, but it leaves little room for anything else. I realize Noise Tools has other functions (I have one and love it), but if you only need a clock there isn’t a small 1U option. I could see a Clock module having a single knob, maybe a speed switch and four outputs. Perhaps x1, x4, /4, and /16

  2. A smaller alternative to Quadratt. The new Triplatt in a 1U format could shave off just enough hp to have more options. Even a “Duplatt” would be great. Perhaps with a switch for each channel to either have the knob function as an attenuator or add an offset to what’s plugged in.

As for the rest of my wishlist, I’ll second a small function generator with a cycling switch, a small logic module, a compressor, and distortion.

Thanks for considering my requests. Can’t wait to see what you have in the pipeline!

4 Likes
#359

@Danjel can’t wait for the LPG!! How many hp? And any eta?

1 Like
#360

I know it’s been covered in other form (i.e. Quadratt 1U) but i think a smaller format Mixer around 14hp would be very cool. Due to compacity maybe some kind of a mix between a Mixer and a Switch ?

Also maybe another Midi I/O with 6xCV, 4xGate in +/- 18hp form factor to be used with the new Palette case ?

1 Like
#361

A version of Scales in 1U would rule (would be a wide one though hmmmm).
Whenever I have a Moog Mother 32 racked in the case, it’s always stellar to be able to play notes along with whatever generative stuff is cookin.

#362

Hi! A 1U clock divider would be super useful. I find myself using Pams in my 7u 84hp more for LFO utilities and it would be fun to just send a master clock out to a little 1U tile for some divisions :slight_smile:

1 Like
#363

+1 for the 1U clock divider. Preferably inside of 14hp. That’s all the 1U space I have left. :laughing:

2 Likes
#364

This is in intellijel format:

1 Like
#365

Ooo. Nice. I’ll look into it. Thanks!

#366

Cant wait for this to be released too!
Really hoping it’ll be dual/stereo like the vca.

#367

it would be cool if you could chain the 1u mults behind panel so you could mult a signal across to the other side of the (7u)case

1 Like
#368

great idea! it would be an easy mod too if you really wanted :wink:

#370

hah yea i did think of that.
seems like a fun and useful little diy mod… mults are cheap too. might even send the 2 signals to my other 7u through an rca jack… i have them side by side so multing a signal all the way across my desk would be more than just a convenience

1 Like
#371

Have you seen these?

1 Like
#372

yes i have
but its not a mult :wink:

octalink seems great for live setup situations where patching between two cases with several signals is cumbersome. for my situation i think id prefer just 1 or 2 multed signals to several locations

#373

An audio output module with a vaccuum tube on the gain. Like Erica synths fusion mixer but without the mixer.

#374

I had the same idea for a buffered mult on each side, where one would go left to right and the other would go right to left. For a passive mult it would probably be a pretty easy DIY.

#375

simple arpeggiator. akin to the 2hp arp but without quantizing of any kind… leave scaling and clock to other utilities. cv over mode though, but mode could be a push button to save space